

<!-- DEBUG
Array
(
    [prod_name] =&gt; Ultra Centrifugal Mill ZM 200
    [prod_intro] =&gt; The RETSCH Ultra Centrifugal Mill ZM 200 is used for the rapid fine size reduction of soft to medium-hard and fibrous materials. Because of the efficient size reduction technique and the comprehensive range of accessories the ZM 200 ensures the gentle preparation of analytical samples in a very short time.
    [prod_examples] =&gt;  bones,  chemical products,  coal,  coke,  drugs,  electronic scrap,  feed pellets,  fertilizers,  food,  leather,  paper,  pharmaceutical materials,  plant materials,  plastics,  powder coating,  refuse derived fuels,  resins,  rubber,  spices,  textiles,  wood,  ...
    [prod_advantages] =&gt; versatile in use due to wide range of accessories
high final fineness
wide speed range, adjustable from 6 000 to 18 000 min-1
considerably increased throughput due to optimally matched frequency converter and 3-phase motor
gentle and very rapid size reduction by 2-step rotor/screen system
quiet and reliable, easy to clean
comfortable parameter setting via display and ergonomic 1-button operation
comfortable safety housing with automatic cover closure
motor compartment and electronics protected against dust and material penetration
2-year warranty, safe design to CE standard
    [prod_principle] =&gt; In the Ultra Centrifugal Mill ZM 200 size reduction takes place by impact and shearing effects between the rotor and the fixed ring sieve. The feed material passes through the hopper (with splash-back protection) onto the rotor. Centrifugal acceleration throws it outward with great energy and it is precrushed on impact with the wedge-shaped rotor teeth moving at a high speed. It is then finely ground between the rotor and the ring sieve. This 2-step grinding ensures particularly gentle but fast processing. The feed material only remains in the grinding chamber for a very short time, which means that the characteristic features of the sample to be determined are not altered. The ground sample is collected in the collecting cassette surrounding the grinding chamber or in the downstream cyclone or paper filter bag.
    [prod_img_main] =&gt; Array
        (
            [uid] =&gt; 67375
            [pid] =&gt; 710316
            [tstamp] =&gt; 1220948840
            [crdate] =&gt; 1220938321
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/geraete_website
            [slfile] =&gt; pic_web_zm200.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; 238124fe1f374ab70966299a50e325d0
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 5
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 2190489
            [fatindex] =&gt; 
            [fatindexok] =&gt; 0
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_principle_img] =&gt; Array
        (
            [uid] =&gt; 27609
            [pid] =&gt; 710315
            [tstamp] =&gt; 1187601755
            [crdate] =&gt; 1187418645
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/funktionsskizzen_neu
            [slfile] =&gt; pic_zm200_function_blue.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; 04802191e39c1ed80d12173f68070e54
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 5
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 949333
            [fatindex] =&gt; 
            [fatindexok] =&gt; 0
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_criteria_01] =&gt; Finezerklinern
    [prod_criteria_02] =&gt; Stuff
    [prod_criteria_03] =&gt; 
    [criteria] =&gt; Array
        (
            [prod_criteria_01] =&gt; Finezerklinern
            [prod_criteria_02] =&gt; Stuff
            [prod_criteria_03] =&gt; 
        )

    [prod_feature_notes] =&gt; *depending on feed material and instrument configuration/settings
    [features] =&gt; Array
        (
            [0] =&gt; Array
                (
                    [ln] =&gt; 137
                    [title] =&gt; Applications
                    [value] =&gt; fine grinding
                )

            [1] =&gt; Array
                (
                    [ln] =&gt; 139
                    [title] =&gt; Field of application
                    [value] =&gt; Agriculture,  biology,  chemistry / plastics,  construction materials,  engineering / electronics,  environment,  food,  medicine / pharmaceuticals,  mineralogy / metallurgy
                )

            [2] =&gt; Array
                (
                    [ln] =&gt; 140
                    [title] =&gt; Feed material
                    [value] =&gt; soft,  medium-hard,  brittle,  fibrous
                )

            [3] =&gt; Array
                (
                    [ln] =&gt; 141
                    [title] =&gt; Size reduction principle
                    [value] =&gt; impact, shearing
                )

            [4] =&gt; Array
                (
                    [ln] =&gt; 142
                    [title] =&gt; Material feed size*
                    [value] =&gt; &lt; 10 mm
                )

            [5] =&gt; Array
                (
                    [ln] =&gt; 143
                    [title] =&gt; Final fineness*
                    [value] =&gt; &lt; 40 &Acirc;&micro;m
                )

            [6] =&gt; Array
                (
                    [ln] =&gt; 144
                    [title] =&gt; Batch size / feed quantity*
                    [value] =&gt; 300 ml with standard cassette &lt;br&gt; 20 ml with mini-cassette &lt;br&gt; 1000 ml with paper filter bag &lt;br&gt; 2500 ml with cyclone &lt;br&gt; 4500 ml with cyclone
                )

            [7] =&gt; Array
                (
                    [ln] =&gt; 145
                    [title] =&gt; Speed at 50 Hz (60 Hz)
                    [value] =&gt; 6000 - 18000 min&lt;sup&gt;-1&lt;/sup&gt;, free selectable
                )

            [8] =&gt; Array
                (
                    [ln] =&gt; 146
                    [title] =&gt; Rotor peripheral speed
                    [value] =&gt; 31 - 93 m/s
                )

            [9] =&gt; Array
                (
                    [ln] =&gt; 147
                    [title] =&gt; Types of rotors
                    [value] =&gt; 6-tooth rotor / 12-tooth rotor / 24-tooth rotor / 8-tooth mini-rotor
                )

            [10] =&gt; Array
                (
                    [ln] =&gt; 148
                    [title] =&gt; Material of grinding tools
                    [value] =&gt;  stainless steel,  titanium,  steel 1.4404,  stainless steel with wear-resistant coating
                )

            [11] =&gt; Array
                (
                    [ln] =&gt; 149
                    [title] =&gt; Sieve sizes
                    [value] =&gt; conidur holes 0.08 / 0.12 / 0.20 / 0.25 / 0.50 / 0.75 / 1.00 /  1.50 mm &lt;br&gt; round holes 3.00 / 4.00 / 5.00 / 6.00 / 10.00 mm
                )

            [12] =&gt; Array
                (
                    [ln] =&gt; 150
                    [title] =&gt; Collector capacity
                    [value] =&gt; 900 ml with standard cassette &lt;br&gt; 50 ml with mini-cassette &lt;br&gt; 3000 ml with paper filter bag &lt;br&gt; 3000 ml with cyclone &lt;br&gt; 5000 ml with cyclone
                )

            [13] =&gt; Array
                (
                    [ln] =&gt; 151
                    [title] =&gt; Drive
                    [value] =&gt; asynchron motor with frequency converter
                )

            [14] =&gt; Array
                (
                    [ln] =&gt; 152
                    [title] =&gt; Protection code
                    [value] =&gt; IP 20
                )

            [15] =&gt; Array
                (
                    [ln] =&gt; 153
                    [title] =&gt; Power consumption
                    [value] =&gt; 1300 W
                )

            [16] =&gt; Array
                (
                    [ln] =&gt; 154
                    [title] =&gt; W x H x D closed
                    [value] =&gt; 410 x 515 x 365 mm
                )

            [17] =&gt; Array
                (
                    [ln] =&gt; 155
                    [title] =&gt; Net weight
                    [value] =&gt; ~ 38 kg
                )

            [18] =&gt; Array
                (
                    [ln] =&gt; 156
                    [title] =&gt; Workplace related emission value
                    [value] =&gt; LpAeq 77.5 dB(A)
                )

        )

    [listFeatures] =&gt; Array
        (
            [0] =&gt; Feed material: soft,  medium-hard,  brittle,  fibrous
            [1] =&gt; Material feed size*: &lt; 10 mm
            [2] =&gt; Final fineness*: &lt; 40 &Acirc;&micro;m
        )

    [searchFeatures] =&gt; Array
        (
        )

    [uid] =&gt; 5
    [page_id] =&gt; 151
    [group_id] =&gt; 2
    [akz] =&gt; B31
)

-->


<!-- DEBUG
Array
(
    [prod_name] =&gt; Cross Beater Mill SK 100
    [prod_intro] =&gt; The Cross Beater Mill SK 100 comfort is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials with a hardness of up to approx. 6 on Mohs&acirc;АЩ scale. The SK 100 is intended for universal use: from sample preparation in laboratories and industrial plant, through pilot installations up to preparing sample batches in production facilities.
    [prod_examples] =&gt; cement clinker,  coal,  coke,  glass,  gravel,  minerals,  ores,  oxide ceramics,  slag,  soils,  ...
    [prod_advantages] =&gt; high throughput
high final fineness
versatile in use
easily changeable bottom sieves
wide range of accessories
maintenance-free direct drive
safe design to CE standard
2-year warranty
    [prod_principle] =&gt; Size reduction in the SK 100 takes place by hammering, impact and shearing effects. The feed material passes from the hopper directly into the center of the grinding chamber, where it is caught by the cross beater and ground between the baffle plates of the cross beater and the toothed grinding insert. As soon as the material is smaller than the aperture size of the bottom sieve used, it passes through the sieve and enters the collecting receptacle. The air drawn in through the hopper by the cross beater accelerates the discharge of the ground material. The airborne fine fraction is separated off by a downstream filter system.
    [prod_img_main] =&gt; Array
        (
            [uid] =&gt; 458
            [pid] =&gt; 710316
            [tstamp] =&gt; 1221055582
            [crdate] =&gt; 1134042930
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/geraete_website
            [slfile] =&gt; pic_web_sk100.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; 745893f029ab52686465efc0e83c1254
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 6
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 678292
            [fatindex] =&gt; 
            [fatindexok] =&gt; 1
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_principle_img] =&gt; Array
        (
            [uid] =&gt; 27604
            [pid] =&gt; 710315
            [tstamp] =&gt; 1187601653
            [crdate] =&gt; 1187418642
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/funktionsskizzen_neu
            [slfile] =&gt; pic_sk_function_blue.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; e27a71b6e9af68bde6f54fd8c5189fca
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 6
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 541031
            [fatindex] =&gt; 
            [fatindexok] =&gt; 0
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_criteria_01] =&gt; Finezerklinern
    [prod_criteria_02] =&gt; Stuff
    [prod_criteria_03] =&gt; 
    [criteria] =&gt; Array
        (
            [prod_criteria_01] =&gt; Finezerklinern
            [prod_criteria_02] =&gt; Stuff
            [prod_criteria_03] =&gt; 
        )

    [prod_feature_notes] =&gt; *depending on feed material and instrument configuration/settings
    [features] =&gt; Array
        (
            [0] =&gt; Array
                (
                    [ln] =&gt; 98
                    [title] =&gt; Applications
                    [value] =&gt; size reduction
                )

            [1] =&gt; Array
                (
                    [ln] =&gt; 100
                    [title] =&gt; Field of application
                    [value] =&gt; Agriculture,  chemistry / plastics,  construction materials,  environment,  glass / ceramics,  mineralogy / metallurgy
                )

            [2] =&gt; Array
                (
                    [ln] =&gt; 101
                    [title] =&gt; Feed material
                    [value] =&gt;  medium-hard,  brittle
                )

            [3] =&gt; Array
                (
                    [ln] =&gt; 102
                    [title] =&gt; Size reduction principle
                    [value] =&gt; impact
                )

            [4] =&gt; Array
                (
                    [ln] =&gt; 103
                    [title] =&gt; Material feed size*
                    [value] =&gt; &lt; 15 mm
                )

            [5] =&gt; Array
                (
                    [ln] =&gt; 104
                    [title] =&gt; Final fineness*
                    [value] =&gt; &lt; 100 &Acirc;&micro;m
                )

            [6] =&gt; Array
                (
                    [ln] =&gt; 105
                    [title] =&gt; Speed at 50 Hz (60 Hz)
                    [value] =&gt; 2850 min&lt;sup&gt;-1&lt;/sup&gt; (3420 min&lt;sup&gt;-1&lt;/sup&gt;)
                )

            [7] =&gt; Array
                (
                    [ln] =&gt; 106
                    [title] =&gt; Rotor peripheral speed
                    [value] =&gt; 22 m/s (26 m/s)
                )

            [8] =&gt; Array
                (
                    [ln] =&gt; 107
                    [title] =&gt; Material of grinding tools
                    [value] =&gt; hardened steel,  stainless steel,  cast iron,  steel 1.1740 (for heavy-metal free grinding)
                )

            [9] =&gt; Array
                (
                    [ln] =&gt; 108
                    [title] =&gt; Sieve sizes
                    [value] =&gt; conidur holes 0.12 / 0.20 / 0.25 / 0.50 / 0.75 / 1.00 / 1.50 / 2.00 mm &lt;br&gt; round holes 3.00 / 4.00 / 5.00 / 6.00 / 8.00 / 10.00 mm
                )

            [10] =&gt; Array
                (
                    [ln] =&gt; 109
                    [title] =&gt; Collector capacity
                    [value] =&gt; 5 l / optional: 30 l
                )

            [11] =&gt; Array
                (
                    [ln] =&gt; 110
                    [title] =&gt; Drive
                    [value] =&gt; 1-phase motor / 3-phase motor
                )

            [12] =&gt; Array
                (
                    [ln] =&gt; 111
                    [title] =&gt; Drive power
                    [value] =&gt; 1.1 kW
                )

            [13] =&gt; Array
                (
                    [ln] =&gt; 112
                    [title] =&gt; Protection code
                    [value] =&gt; IP 54
                )

            [14] =&gt; Array
                (
                    [ln] =&gt; 113
                    [title] =&gt; W x H x D closed
                    [value] =&gt; 560 x 1150 x 700 mm (with base frame)
                )

            [15] =&gt; Array
                (
                    [ln] =&gt; 114
                    [title] =&gt; Net weight
                    [value] =&gt; ~ 57 kg (with base frame)
                )

            [16] =&gt; Array
                (
                    [ln] =&gt; 115
                    [title] =&gt; Workplace related emission value
                    [value] =&gt; LpAeq 81 dB(A)
                )

        )

    [listFeatures] =&gt; Array
        (
            [0] =&gt; Feed material:  medium-hard,  brittle
            [1] =&gt; Material feed size*: &lt; 15 mm
            [2] =&gt; Final fineness*: &lt; 100 &Acirc;&micro;m
        )

    [searchFeatures] =&gt; Array
        (
        )

    [uid] =&gt; 6
    [page_id] =&gt; 159
    [group_id] =&gt; 2
    [akz] =&gt; B01
)

-->


<!-- DEBUG
Array
(
    [prod_name] =&gt; Rotor Beater Mill SR 200
    [prod_intro] =&gt; The&amp;nbsp;rotor beater mill SR 200&amp;nbsp;is suitable for the coarse and fine crushing in batches or continuously, as well as the deagglomeration of dry, soft, medium-hard, organic and inorganic substances. The mill can be used in the laboratory to prepare samples, and in technical training facilities and operational plants for large sample quantities. 
    [prod_examples] =&gt; bricks, cement clinker,  chemical products,  coal,  coke,  drugs,  feed pellets,  fertilizers,  food,  pharmaceutical materials,  plant materials,  salts,  seeds,  spices,  ...
    [prod_advantages] =&gt; large throughput
high final fineness
simple to clean
easy to replace grinding and sieve inserts
quick-acting door lock and brake motor
2-year warranty, CE marked
    [prod_principle] =&gt; Size reduction and deagglomeration in the SR 200 are achieved by hammering, impact and shear effects. The feed material passes from the hopper into the center of the grinding chamber where it is crushed between the rotor, sieve and grinding inserts. As soon as the material is smaller than the aperture size of the sieve it enters the collecting receptacle. The quick-acting door lock ensures easy access to the grinding chamber for quick cleaning. With their motor brake (braking time 0.5 s), safety switch, splashback and access barrier in the inlet and outlet areas, the SR 200 offers the highest degree of operating safety.
    [prod_img_main] =&gt; Array
        (
            [uid] =&gt; 480
            [pid] =&gt; 710316
            [tstamp] =&gt; 1221055606
            [crdate] =&gt; 1134042931
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/geraete_website
            [slfile] =&gt; pic_web_sr200.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; e05267f87557e3b02ebd343acfdc51b5
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 7
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 823632
            [fatindex] =&gt; 
            [fatindexok] =&gt; 1
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_principle_img] =&gt; Array
        (
            [uid] =&gt; 27608
            [pid] =&gt; 710315
            [tstamp] =&gt; 1187601740
            [crdate] =&gt; 1187418644
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/funktionsskizzen_neu
            [slfile] =&gt; pic_sr_function_blue.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; bd2e5206d09ca61630a12d1490158c27
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 7,8
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 622944
            [fatindex] =&gt; 
            [fatindexok] =&gt; 0
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_criteria_01] =&gt; Finezerklinern
    [prod_criteria_02] =&gt; Stuff
    [prod_criteria_03] =&gt; 
    [criteria] =&gt; Array
        (
            [prod_criteria_01] =&gt; Finezerklinern
            [prod_criteria_02] =&gt; Stuff
            [prod_criteria_03] =&gt; 
        )

    [prod_feature_notes] =&gt; *depending on feed material and instrument configuration/settings
    [features] =&gt; Array
        (
            [0] =&gt; Array
                (
                    [ln] =&gt; 201
                    [title] =&gt; Applications
                    [value] =&gt; size reduction, deagglomeration
                )

            [1] =&gt; Array
                (
                    [ln] =&gt; 203
                    [title] =&gt; Field of application
                    [value] =&gt; Agriculture,  chemistry / plastics,  construction materials,  environment,  food,  medicine / pharmaceuticals
                )

            [2] =&gt; Array
                (
                    [ln] =&gt; 204
                    [title] =&gt; Feed material
                    [value] =&gt; soft,  medium-hard
                )

            [3] =&gt; Array
                (
                    [ln] =&gt; 205
                    [title] =&gt; Size reduction principle
                    [value] =&gt; impact, shearing
                )

            [4] =&gt; Array
                (
                    [ln] =&gt; 206
                    [title] =&gt; Material feed size*
                    [value] =&gt; &lt; 15 mm
                )

            [5] =&gt; Array
                (
                    [ln] =&gt; 207
                    [title] =&gt; Final fineness*
                    [value] =&gt; &lt; 80 &Acirc;&micro;m
                )

            [6] =&gt; Array
                (
                    [ln] =&gt; 208
                    [title] =&gt; Speed at 50 Hz (60 Hz)
                    [value] =&gt; 2850 min&lt;sup&gt;-1&lt;/sup&gt; (3420 min&lt;sup&gt;-1&lt;/sup&gt;)
                )

            [7] =&gt; Array
                (
                    [ln] =&gt; 209
                    [title] =&gt; Rotor peripheral speed
                    [value] =&gt; 20.4 m/s (24.5 m/s)
                )

            [8] =&gt; Array
                (
                    [ln] =&gt; 210
                    [title] =&gt; Types of rotors
                    [value] =&gt; rotor beater
                )

            [9] =&gt; Array
                (
                    [ln] =&gt; 211
                    [title] =&gt; Material of grinding tools
                    [value] =&gt; cast iron: grinding chamber - stainless steel: rotor / ring sieves / retaining frame - chromium plated: retaining frame
                )

            [10] =&gt; Array
                (
                    [ln] =&gt; 212
                    [title] =&gt; Sieve sizes
                    [value] =&gt; conidur holes 0.08 / 0.12 / 0.20 / 0.25 / 0.50 / 0.75 / 1.00 / 1.25 / 1.50 / 2.00 mm &lt;br&gt; round holes 3.00 / 4.00 / 10.00 mm
                )

            [11] =&gt; Array
                (
                    [ln] =&gt; 213
                    [title] =&gt; Collector capacity
                    [value] =&gt; 5 l / optional: 30 l
                )

            [12] =&gt; Array
                (
                    [ln] =&gt; 214
                    [title] =&gt; Drive
                    [value] =&gt; 1-phase motor / 3-phase motor
                )

            [13] =&gt; Array
                (
                    [ln] =&gt; 215
                    [title] =&gt; Protection code
                    [value] =&gt; IP 54
                )

            [14] =&gt; Array
                (
                    [ln] =&gt; 216
                    [title] =&gt; Power consumption
                    [value] =&gt; 1.1 kW
                )

            [15] =&gt; Array
                (
                    [ln] =&gt; 217
                    [title] =&gt; W x H x D closed
                    [value] =&gt; 560 x 1150 x 700 mm (with base frame)
                )

            [16] =&gt; Array
                (
                    [ln] =&gt; 218
                    [title] =&gt; Net weight
                    [value] =&gt; ~ 57 kg (with base frame)
                )

            [17] =&gt; Array
                (
                    [ln] =&gt; 219
                    [title] =&gt; Workplace related emission value
                    [value] =&gt; LpAeq 81 dB(A)
                )

        )

    [listFeatures] =&gt; Array
        (
            [0] =&gt; Feed material: soft,  medium-hard
            [1] =&gt; Material feed size*: &lt; 15 mm
            [2] =&gt; Final fineness*: &lt; 80 &Acirc;&micro;m
            [3] =&gt; Speed at 50 Hz (60 Hz): 2850 min&lt;sup&gt;-1&lt;/sup&gt; (3420 min&lt;sup&gt;-1&lt;/sup&gt;)
        )

    [searchFeatures] =&gt; Array
        (
        )

    [uid] =&gt; 7
    [page_id] =&gt; 163
    [group_id] =&gt; 2
    [akz] =&gt; B71
)

-->


<!-- DEBUG
Array
(
    [prod_name] =&gt; Rotor Beater Mill SR 300
    [prod_intro] =&gt; The SR 300 is the leader among the Rotor Beater Mills. Its high speed in comparison to the SR 200 allows a significantly higher throughput. The ground sample also has a larger fraction of fine material. Grinding chamber, feed hopper and material inlet and outlet are completely made from highquality stainless steel.
    [prod_examples] =&gt; bricks, cement clinker,  chemical products,  coal,  coke,  drugs,  feed pellets,  fertilizers,  food,  pharmaceutical materials,  plant materials,  plastics,  salts,  seeds,  soils,  spices,  sugar,  ...
    [prod_advantages] =&gt; high throughput
high final fineness
versatile in use
easy cleaning
exchangeable grinding and sieve inserts
quick-action door lock and motor brake
safe design to CE standard
2-year warranty
    [prod_principle] =&gt; Size reduction and deagglomeration in the SR 300 are achieved by hammering, impact and shear effects. The feed material passes from the hopper into the center of the grinding chamber where it is crushed between the rotor, sieve and grinding inserts. As soon as the material is smaller than the aperture size of the sieve it enters the collecting receptacle. The quick-acting door lock ensures easy access to the grinding chamber for quick cleaning. With their motor brake (braking time &lt; 0.5 s), safety switch, splashback and access barrier in the inlet and outlet areas, Rotor Beater Mills offer the highest degree of operating safety.
    [prod_img_main] =&gt; Array
        (
            [uid] =&gt; 486
            [pid] =&gt; 710316
            [tstamp] =&gt; 1221055613
            [crdate] =&gt; 1134042932
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/geraete_website
            [slfile] =&gt; pic_web_sr300.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; 1c06bfe33733e6cb2b18d359e00ddb4b
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 8
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 1033931
            [fatindex] =&gt; 
            [fatindexok] =&gt; 1
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_principle_img] =&gt; Array
        (
            [uid] =&gt; 27608
            [pid] =&gt; 710315
            [tstamp] =&gt; 1187601740
            [crdate] =&gt; 1187418644
            [cruser_id] =&gt; 0
            [deleted] =&gt; 0
            [hidden] =&gt; 0
            [slpath] =&gt; /SalesLibrary/bilder/300dpi/milling/funktionsskizzen_neu
            [slfile] =&gt; pic_sr_function_blue.jpg
            [flag_changed] =&gt; 0
            [flag_moved] =&gt; 0
            [flag_new] =&gt; 0
            [flag_deleted] =&gt; 0
            [flag_review] =&gt; 0
            [slmd5] =&gt; bd2e5206d09ca61630a12d1490158c27
            [slchecked] =&gt; 1
            [public] =&gt; 0
            [business_area_id] =&gt; 1
            [product_group_id] =&gt; 2
            [product_id] =&gt; 7,8
            [slsuffix] =&gt; jpg
            [sllang] =&gt; 0
            [slfiletitle] =&gt; 
            [slfiledesc] =&gt; 
            [sorting] =&gt; 0
            [sltag] =&gt; 0
            [slthumbnail_upload] =&gt; 
            [sllongtext] =&gt; 
            [flag_hidden] =&gt; 0
            [slthumbnail_sl] =&gt; 
            [slsize] =&gt; 622944
            [fatindex] =&gt; 
            [fatindexok] =&gt; 0
            [changelog_display] =&gt; 0
            [changelog_notes] =&gt; 
            [industries] =&gt; 
        )

    [prod_criteria_01] =&gt; Finezerklinern
    [prod_criteria_02] =&gt; Stuff
    [prod_criteria_03] =&gt; 
    [criteria] =&gt; Array
        (
            [prod_criteria_01] =&gt; Finezerklinern
            [prod_criteria_02] =&gt; Stuff
            [prod_criteria_03] =&gt; 
        )

    [prod_feature_notes] =&gt; *depending on feed material and instrument configuration/settings
    [features] =&gt; Array
        (
            [0] =&gt; Array
                (
                    [ln] =&gt; 221
                    [title] =&gt; Applications
                    [value] =&gt; size reduction, deagglomeration
                )

            [1] =&gt; Array
                (
                    [ln] =&gt; 223
                    [title] =&gt; Field of application
                    [value] =&gt; Agriculture,  chemistry / plastics,  construction materials,  environment,  food,  medicine / pharmaceuticals
                )

            [2] =&gt; Array
                (
                    [ln] =&gt; 224
                    [title] =&gt; Feed material
                    [value] =&gt; soft,  medium-hard
                )

            [3] =&gt; Array
                (
                    [ln] =&gt; 225
                    [title] =&gt; Size reduction principle
                    [value] =&gt; impact, shearing
                )

            [4] =&gt; Array
                (
                    [ln] =&gt; 226
                    [title] =&gt; Material feed size*
                    [value] =&gt; &lt; 15 mm
                )

            [5] =&gt; Array
                (
                    [ln] =&gt; 227
                    [title] =&gt; Final fineness*
                    [value] =&gt; &lt; 50 &Acirc;&micro;m
                )

            [6] =&gt; Array
                (
                    [ln] =&gt; 228
                    [title] =&gt; Speed at 50 Hz (60 Hz)
                    [value] =&gt; 8100 min&lt;sup&gt;-1&lt;/sup&gt; (9700 min&lt;sup&gt;-1&lt;/sup&gt;)
                )

            [7] =&gt; Array
                (
                    [ln] =&gt; 229
                    [title] =&gt; Rotor peripheral speed
                    [value] =&gt; 58 m/s (69.5 m/s)
                )

            [8] =&gt; Array
                (
                    [ln] =&gt; 230
                    [title] =&gt; Types of rotors
                    [value] =&gt; rotor beater
                )

            [9] =&gt; Array
                (
                    [ln] =&gt; 231
                    [title] =&gt; Material of grinding tools
                    [value] =&gt; stainless steel: grinding chamber / ring sieves / retaining frame -  chromium plated: retaining frame
                )

            [10] =&gt; Array
                (
                    [ln] =&gt; 232
                    [title] =&gt; Sieve sizes
                    [value] =&gt; conidur holes 0.08 / 0.12 / 0.20 / 0.25 / 0.50 / 0.75 / 1.00 / 1.25 / 1.50 / 2.00 mm &lt;br&gt; round holes 3.00 / 4.00 / 10.00 mm
                )

            [11] =&gt; Array
                (
                    [ln] =&gt; 233
                    [title] =&gt; Collector capacity
                    [value] =&gt; 5 l / optional: 30 l
                )

            [12] =&gt; Array
                (
                    [ln] =&gt; 234
                    [title] =&gt; Drive
                    [value] =&gt; 3-phase motor
                )

            [13] =&gt; Array
                (
                    [ln] =&gt; 235
                    [title] =&gt; Protection code
                    [value] =&gt; IP 54
                )

            [14] =&gt; Array
                (
                    [ln] =&gt; 236
                    [title] =&gt; Power consumption
                    [value] =&gt; 2.2 kW
                )

            [15] =&gt; Array
                (
                    [ln] =&gt; 237
                    [title] =&gt; W x H x D closed
                    [value] =&gt; 560 x 1200 x 700 mm (with base frame)
                )

            [16] =&gt; Array
                (
                    [ln] =&gt; 238
                    [title] =&gt; Net weight
                    [value] =&gt; ~ 95 kg
                )

            [17] =&gt; Array
                (
                    [ln] =&gt; 239
                    [title] =&gt; Workplace related emission value
                    [value] =&gt; LpAeq 91 dB(A)
                )

        )

    [listFeatures] =&gt; Array
        (
            [0] =&gt; Feed material: soft,  medium-hard
            [1] =&gt; Material feed size*: &lt; 15 mm
            [2] =&gt; Final fineness*: &lt; 50 &Acirc;&micro;m
            [3] =&gt; Speed at 50 Hz (60 Hz): 8100 min&lt;sup&gt;-1&lt;/sup&gt; (9700 min&lt;sup&gt;-1&lt;/sup&gt;)
        )

    [searchFeatures] =&gt; Array
        (
        )

    [uid] =&gt; 8
    [page_id] =&gt; 167
    [group_id] =&gt; 2
    [akz] =&gt; B81
)

-->

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
	<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<!-- 
	This website is powered by TYPO3 - inspiring people to share!
	TYPO3 is a free open source Content Management Framework initially created by Kasper Skaarhoj and licensed under GNU/GPL.
	TYPO3 is copyright 1998-2006 of Kasper Skaarhoj. Extensions are copyright of their respective owners.
	Information and contribution at http://typo3.com/ and http://typo3.org/
-->

	<base href="http://www.retsch.co.uk/" />
<title>Rotor Mills : Milling : Products : Retsch</title>
<script language="JavaScript" type="text/javascript" src="c-js/prototype-1.6.0-packer.js,effects.js,dragdrop.js,controls.js,functions.js,shadowbox-prototype.js,shadowbox.js"></script>
<link rel="stylesheet" type="text/css" href="c-css/base.css,shadowbox-light.css" media="screen" />
<link rel="stylesheet" type="text/css" href="c-css/print.css" media="print" />
<meta name="description" content="Rotor Mills Milling Products" />
<meta name="keywords" content="Rotor Mills,Milling,Products" />
<meta http-equiv="Content-Language" content="en">

	<meta name="generator" content="TYPO3 4.1 CMS" />


</head>
<body>
<!-- Begin Sitestat4 Loadingtime1 code -->
<script language='JavaScript1.1' type='text/javascript'>ns_loadingtime1=(new Date()).getTime()</script>
<!-- End Sitestat4 Loadingtime1 code -->

<div id="siteFrame">
	<div id="topArea">
		<div id="logoBox"><a href="/uk/"><img src="fileadmin/retsch/fw/logo-retsch.gif" width="228" height="59" border="0" alt="Milling and Sieving" title="Milling and Sieving" /></a></div>
		<div id="topNavigation">
			<ul><li class="first active"><a href="uk/products/"  >Products</a></li><li><a href="uk/applications/applications/"  >Applications</a></li><li><a href="uk/news/"  >News</a></li><li><a href="uk/contact/"  >Contact</a></li><li><a href="uk/company/"  >Company</a></li><li><a href="uk/downloads/"  >Downloads</a></li></ul>
		</div>
		<div id="topHome"><a href="/uk/"><img src="/fileadmin/retsch/fw/icon_home.gif" width="20" height="18" alt="Home"></a></div>
		<div id="languageArea">
			<div id="languageList"><div id="languageListInner"><div class="label">Languages</div><a href="http://www.retsch.com/products/milling/rotor-mills/" id="en" title="English" class="flag "><span class="code">retsch.com</span></a>
<a href="http://www.retsch-us.com/us/products/milling/rotor-mills/" id="us" title="America" class="flag "><span class="code">us</span></a>
<a href="http://www.retsch.de/de/produkte/zerkleinern/rotormuehlen/" id="de" title="German" class="flag "><span class="code">de</span></a>
<a href="uk/products/milling/rotor-mills/" id="uk" title="United Kingdom" class="flag  active"><span class="code">uk</span></a>
<a href="http://www.retsch.it/it/prodotti/macinazione/mulini-a-rotore/" id="it" title="Italian" class="flag "><span class="code">it</span></a>
<a href="http://www.retsch-fr.com/fr/produits/broyer/broyeurs-a-rotor/" id="fr" title="French" class="flag "><span class="code">fr</span></a>
<a href="http://www.retsch.es/es/productos/molienda/molinos-de-rotor/" id="es" title="Spanish" class="flag "><span class="code">es</span></a>
<a href="http://www.retsch.ru/ru/products/milling/rotor-mills/" id="ru" title="Russian" class="flag "><span class="code">ru</span></a>
<a href="http://www.retsch.cn/cn/products/milling/rotor-mills/" id="cn" title="Chinese" class="flag "><span class="code">cn</span></a>
<a href="http://www.retsch.jp/jp/products/milling/rotor-mills/" id="jp" title="уГмуГГуГБуВз Japan" class="flag "><span class="code">jp</span></a></div></div>
		</div>
		<div id="topSearch">
			<form action="uk/search/?no_cache=1" method="get" id="topSearchForm" name="searchForm">
				<input type="search" autocomplete="off" id="acsearch" name="search" class="topSearchField" value="">
				<input type="hidden" name="nocache" value="1">
				<input type="hidden" name="L" value="9">
				<button type="submit" class="image"><i>Search</i></button>
			</form>
		</div>
	</div>
	<div id="mainArea">
		<div id="mainNavArea"><div id="areaImage"><img src="fileadmin/retsch/images/areas/NaviLinks_Milling_0005.jpg" width="228" height="55"></div><ul><li><a href="uk/products/" onfocus="blurLink(this);"  >Products</a></li><ul><li><a href="uk/products/milling/"  class="hasSub open">Milling</a><ul><li><a href="uk/products/milling/product-selection-milling/"  >Product Selection Milling</a></li><li><a href="uk/products/milling/jaw-crushers/"  class="hasSub">Jaw Crushers</a></li><li><a href="uk/products/milling/rotor-mills/"  class="hasSub active">Rotor Mills</a><ul><li><a href="uk/products/milling/rotor-mills/zm-200/"  class="hasSub">ZM 200</a></li><li><a href="uk/products/milling/rotor-mills/sk-100/"  class="hasSub">SK 100</a></li><li><a href="uk/products/milling/rotor-mills/sr-200/"  class="hasSub">SR 200</a></li><li><a href="uk/products/milling/rotor-mills/sr-300/"  class="hasSub">SR 300</a></li></ul></li><li><a href="uk/products/milling/cutting-mills/"  class="hasSub">Cutting Mills</a></li><li><a href="uk/products/milling/mortar-grinders/"  class="hasSub">Mortar Grinders</a></li><li><a href="uk/products/milling/disc-mills/"  class="hasSub">Disc Mills</a></li><li><a href="uk/products/milling/ball-mills/"  class="hasSub">Ball Mills</a></li></ul></li><li><a href="uk/products/sieving/"  class="hasSub">Sieving</a></li><li><a href="uk/products/assisting/"  class="hasSub">Assisting </a></li></ul></ul><a id="c30027"></a><p><script type="text/javascript" src="/fileadmin/retsch/js/swfobject.js"></script><div id="container_11fdda320001f8432cb19623193ec2f9"><a href="http://www.tsdesign.de/gewinnspiele/retsch/grandprix/en/index.html"><img src="/dl.php?fileId=78119&inline=true"></a></div><script type="text/javascript">s1 = new SWFObject("/dl.php?fileId=78121&inline=true","flash_11fdda320001f8432cb19623193ec2f9","228","162","8");s1.addVariable("width","228");s1.addVariable("height","162");s1.write("container_11fdda320001f8432cb19623193ec2f9");</script></p><img src="clear.gif" width="1" height="10" border="0" class="spacer-gif" alt="" title="" /><br /></div>
		<div id="mainContentArea">
			<div id="trackPath"><a href="uk/" onfocus="blurLink(this);"  >Home</a>&nbsp;&gt;&nbsp;<a href="uk/products/" onfocus="blurLink(this);"  >Products</a>&nbsp;&gt;&nbsp;<a href="uk/products/milling/" onfocus="blurLink(this);"  >Milling</a>&nbsp;&gt;&nbsp;Rotor Mills</div>
			<div id="pageTitle"><h1>Rotor Mills</h1></div>
			<div class="contentBox"><a id="c2606"></a>


	<!--

		BEGIN: Content of extension "retsch_products", plugin "tx_retschproducts_pi1"

	-->
	<div class="tx-retschproducts-pi1">
		
<table class="list_product">
												<tr>
			<td class="title"><h2><a href="uk/products/milling/rotor-mills/zm-200/">Ultra Centrifugal Mill ZM 200</a></h2></td>
			<td class="spacer">&nbsp;</td>
			<td class="title"><h2><a href="uk/products/milling/rotor-mills/sk-100/">Cross Beater Mill SK 100</a></h2></td>		</tr>
		<tr>
			<td class="img"><a href="uk/products/milling/rotor-mills/zm-200/"><img src="typo3temp/pics/f124789335.jpg" width="127" height="200" border="0" alt="Ultra Centrifugal Mill ZM 200" title="Ultra Centrifugal Mill ZM 200" /></a></td>
			<td class="spacer">&nbsp;</td>
			<td class="img"><a href="uk/products/milling/rotor-mills/sk-100/"><img src="typo3temp/pics/74bd68a658.jpg" width="142" height="200" border="0" alt="Cross Beater Mill SK 100" title="Cross Beater Mill SK 100" /></a></td>		</tr>
		<tr>
			<td class="info">
				<ul>
									<li>Feed material: soft,  medium-hard,  brittle,  fibrous</li>
									<li>Material feed size*: < 10 mm</li>
									<li>Final fineness*: < 40 ┬╡m</li>
								</ul>
			</td>
			<td class="spacer">&nbsp;</td>
			<td class="info">
				<ul>
									<li>Feed material:  medium-hard,  brittle</li>
									<li>Material feed size*: < 15 mm</li>
									<li>Final fineness*: < 100 ┬╡m</li>
								</ul>
			</td>		</tr>
		<tr>
			<td class="vspacer">&nbsp;</td>
			<td class="vspacer">&nbsp;</td>
			<td class="vspacer">&nbsp;</td>
		</tr>
															<tr>
			<td class="title"><h2><a href="uk/products/milling/rotor-mills/sr-200/">Rotor Beater Mill SR 200</a></h2></td>
			<td class="spacer">&nbsp;</td>
			<td class="title"><h2><a href="uk/products/milling/rotor-mills/sr-300/">Rotor Beater Mill SR 300</a></h2></td>		</tr>
		<tr>
			<td class="img"><a href="uk/products/milling/rotor-mills/sr-200/"><img src="typo3temp/pics/679daadc41.jpg" width="131" height="200" border="0" alt="Rotor Beater Mill SR 200" title="Rotor Beater Mill SR 200" /></a></td>
			<td class="spacer">&nbsp;</td>
			<td class="img"><a href="uk/products/milling/rotor-mills/sr-300/"><img src="typo3temp/pics/c2bb67a2d4.jpg" width="129" height="200" border="0" alt="Rotor Beater Mill SR 300" title="Rotor Beater Mill SR 300" /></a></td>		</tr>
		<tr>
			<td class="info">
				<ul>
									<li>Feed material: soft,  medium-hard</li>
									<li>Material feed size*: < 15 mm</li>
									<li>Final fineness*: < 80 ┬╡m</li>
									<li>Speed at 50 Hz (60 Hz): 2850 min<sup>-1</sup> (3420 min<sup>-1</sup>)</li>
								</ul>
			</td>
			<td class="spacer">&nbsp;</td>
			<td class="info">
				<ul>
									<li>Feed material: soft,  medium-hard</li>
									<li>Material feed size*: < 15 mm</li>
									<li>Final fineness*: < 50 ┬╡m</li>
									<li>Speed at 50 Hz (60 Hz): 8100 min<sup>-1</sup> (9700 min<sup>-1</sup>)</li>
								</ul>
			</td>		</tr>
		<tr>
			<td class="vspacer">&nbsp;</td>
			<td class="vspacer">&nbsp;</td>
			<td class="vspacer">&nbsp;</td>
		</tr>
			</table>

<div class="clear"></div>
<p><small>*depending on feed material and instrument configuration/settings</small></p>
	</div>
	
	<!-- END: Content of extension "retsch_products", plugin "tx_retschproducts_pi1" -->

	<img src="clear.gif" width="1" height="10" border="0" class="spacer-gif" alt="" title="" /><br /></div>
		</div>
		<div id="mainActionArea"><div id="mainActionAreaPadding"><a id="c2607"></a>


	<!--

		BEGIN: Content of extension "retsch_infoblock", plugin "tx_retschinfoblock_pi2"

	-->
	<div class="tx-retschinfoblock-pi2">
		<div class="fileList">
					<div class="ibItem">
	<p><a name="infoTitle"></a>Brochures</p>
	<ul>
			<!-- Render DEFAULT -->
																		<!-- <a href="/dl.php?fileId=2052&amp;L="></a> -->
				<a href="/dl.php?fileId=2052" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/2052/brochure_general_en.pdf');" target="_blank"></a>
				<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="/dl.php?fileId=2052" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/2052/brochure_general_en.pdf');" target="_blank">Product overview</a></div></li>
																					<!-- <a href="/dl.php?fileId=36159&amp;L="></a> -->
				<a href="/dl.php?fileId=36159" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/36159/brochure_rotor_mills_en.pdf');" target="_blank"></a>
				<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="/dl.php?fileId=36159" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/36159/brochure_rotor_mills_en.pdf');" target="_blank">Rotor Mills</a></div></li>
							</ul>
		<!-- /Render DEFAULT -->
		</ul>
	</div>
</div><!-- REMOTE_ADDR=38.103.63.60 -->

<div class="fileList">
					<div class="ibItem">
	<p><a name="infoTitle"></a>Videos</p>
	<ul>
			<!-- Render VIDEO -->
														<a href="/dlvideo/fileId/4578/lang/38/"></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_rm.gif);"><div class="fileTitle"><a href="/dlvideo/fileId/4578/lang/38/" onclick="window.open('/dlvideo/fileId/4578/lang/38/','video4578','width=800,height=630,resizable=yes,scrollbars=no,status=no,toolbar=no,location=no');return false;">Cross Beater Mill SK 100</a></div></li>
														<a href="/dlvideo/fileId/6879/lang/38/"></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_rm.gif);"><div class="fileTitle"><a href="/dlvideo/fileId/6879/lang/38/" onclick="window.open('/dlvideo/fileId/6879/lang/38/','video6879','width=800,height=630,resizable=yes,scrollbars=no,status=no,toolbar=no,location=no');return false;">Rotor Mills SR 200 / SR 300</a></div></li>
														<a href="/dlvideo/fileId/3303/lang/38/"></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_rm.gif);"><div class="fileTitle"><a href="/dlvideo/fileId/3303/lang/38/" onclick="window.open('/dlvideo/fileId/3303/lang/38/','video3303','width=800,height=630,resizable=yes,scrollbars=no,status=no,toolbar=no,location=no');return false;">Ultra Centrifugal Mill ZM 200</a></div></li>
				<!-- /Render VIDEO -->
		</ul>
	</div>
</div><!-- REMOTE_ADDR=38.103.63.60 -->
<div class="fileList">
					<div class="ibItem">
	<p><a name="infoTitle"></a>Testimonials</p>
	<ul>
			<!-- Render DEFAULT -->
																		<!-- <a href="/dl.php?fileId=75569&amp;L="></a> -->
				<a href="/dl.php?fileId=75569" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/75569/cr_imat_uve_de_en.pdf');" target="_blank"></a>
				<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="/dl.php?fileId=75569" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/75569/cr_imat_uve_de_en.pdf');" target="_blank">Preparation of plastic parts - imat uve</a></div></li>
																					<!-- <a href="/dl.php?fileId=75567&amp;L="></a> -->
				<a href="/dl.php?fileId=75567" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/75567/cr_schaeferkalk_de_en.pdf');" target="_blank"></a>
				<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="/dl.php?fileId=75567" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/75567/cr_schaeferkalk_de_en.pdf');" target="_blank">Quality Control of Limestone - Schaeferkalk</a></div></li>
							</ul>
		<!-- /Render DEFAULT -->
		</ul>
	</div>
</div><!-- REMOTE_ADDR=38.103.63.60 -->


	<div class="ibItem"><p>
	Selection Guide
	<br /><a href="uk/product-comparison-uk/?group=2" onclick="vHWin=window.open('http://www.retsch.co.uk/uk/product-comparison-uk/?group=2','popupWindow','width=900,height=600,status=0,menubar=0,scrollbars=1,resizable=1');vHWin.focus();return false;">Product Comparison Rotor Mills</a>	<br />
	</p></div>


<div class="fileList">
					<div class="ibItem">
	<p><a name="infoTitle"></a>"the sample"</p>
	<ul>
			<!-- Render SAMPLE -->
														<a href="uk/products/milling/rotor-mills/dlDetails/1/file/75146/?L="><!-- <img src="typo3temp/pics/017ad47e39.jpg" width="155" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/75146/?L="> No. 33</a></div></li>
																	<a href="uk/products/milling/rotor-mills/dlDetails/1/file/54978/?L="><!-- <img src="typo3temp/pics/d1e4f403bb.jpg" width="155" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/54978/?L="> No. 32</a></div></li>
																	<a href="uk/products/milling/rotor-mills/dlDetails/1/file/34435/?L="><!-- <img src="typo3temp/pics/6b892173f3.jpg" width="155" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/34435/?L="> No. 31</a></div></li>
							<!-- /Render SAMPLE -->
		</ul>
	</div>
					<div class="ibItem">
	<p><a name="infoTitle"></a>Application Reports</p>
	<ul>
			<!-- Render SAMPLE -->
														<a href="uk/products/milling/rotor-mills/dlDetails/1/file/37909/?L="><!-- <img src="typo3temp/pics/9454287016.jpg" width="141" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/37909/?L="> Sick with Dolls</a></div></li>
																	<a href="uk/products/milling/rotor-mills/dlDetails/1/file/13582/?L="><!-- <img src="typo3temp/pics/b0244a39f3.jpg" width="141" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/13582/?L="> Cement - representative sample preparation is important</a></div></li>
																	<a href="uk/products/milling/rotor-mills/dlDetails/1/file/10511/?L="><!-- <img src="typo3temp/pics/bc0f211b5c.jpg" width="145" height="200" border="0" alt="" title="" /> --></a>
			<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="uk/products/milling/rotor-mills/dlDetails/1/file/10511/?L="> Tracking down hazardous substances (RoHS/WEEE)</a></div></li>
							<!-- /Render SAMPLE -->
		</ul>
	</div>
</div><!-- REMOTE_ADDR=38.103.63.60 -->


<div class="fileList">
					<div class="ibItem">
	<p><a name="infoTitle"></a>Technical Information</p>
	<ul>
			<!-- Render DEFAULT -->
																		<!-- <a href="/dl.php?fileId=6580&amp;L="></a> -->
				<a href="/dl.php?fileId=6580" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/6580/material_analyses_of_grinding_tools_en_de.pdf');" target="_blank"></a>
				<li style="background-image:url(/fileadmin/retsch/images/icons/icon_pdf.gif);"><div class="fileTitle"><a href="/dl.php?fileId=6580" onclick="javascript:pageTrackerIntl._trackPageview('/downloads/retsch/6580/material_analyses_of_grinding_tools_en_de.pdf');" target="_blank">Material Analyses of Grinding Tools</a></div></li>
							</ul>
		<!-- /Render DEFAULT -->
		</ul>
	</div>
</div><!-- REMOTE_ADDR=38.103.63.60 -->

	</div>
	
	<!-- END: Content of extension "retsch_infoblock", plugin "tx_retschinfoblock_pi2" -->

	<img src="clear.gif" width="1" height="10" border="0" class="spacer-gif" alt="" title="" /><br /></div></div>
	</div>
	<div id="footArea">
		<div id="verderLink"><a href="http://www.verder.com/" target="_top"><img src="fileadmin/retsch/fw/verder.gif" alt="a Verder company" width="104" height="16" border="0"></a></div>
		<div id="siteService">
			<div class="icon"><a href="/uk/"><img src="/fileadmin/retsch/fw/icon_home.gif" width="20" height="18" alt="Home"></a></div><div class="icon"><a href="uk/contact/"><img src="/fileadmin/retsch/fw/icon_contact.gif" width="20" height="18" alt="Contact"></a></div><div class="icon"><a href="javascript:window.print();"><img src="/fileadmin/retsch/fw/icon_print.gif" width="20" height="18" alt="Print"></a></div>
			<div><a href="uk/siteservice/sitemap/"  >Sitemap</a></div><div><a href="uk/siteservice/imprint/"  >Imprint</a></div><div class="lastchild"><a href="uk/agencyweb/"  >AgencyWeb</a></div>
		</div>
		<div id="printService"></div>
	</div>
	<div class="clear"></div>
</div>

<div id="accessoryInfosBox" style="display:none;">
	<div id="accessoryInfosBoxInner">
		<div style="float:right;"><a href="#" onclick="new Effect.Fade('accessoryInfosBox'); return false;"><img src="/fileadmin/retsch/icons/cross.png" alt="Close" border="0"></a></div>
		<div id="accessoryInfosBoxContent">

		</div>
	</div>
</div>

<!-- Begin Sitestat4 code -->
<script language="JavaScript1.1">
<!--
function sitestat(ns_l){ns_l+="&ns__t="+(new Date()).getTime();ns_pixelUrl=ns_l;
ns_0=document.referrer;
ns_0=(ns_0.lastIndexOf("/")==ns_0.length-1)?ns_0.substring(ns_0.lastIndexOf("/"),0):ns_0;
if(ns_0.length>0)ns_l+="&ns_referrer="+escape(ns_0);
if(document.images){ns_1=new Image();ns_1.src=ns_l;}else
document.write("<img src="+ns_l+" width='1' height='1'>");}
sitestat("http://de.sitestat.com/retsch/de/s?site.uk.home.products.milling.rotormills.");
//-->
</script>


<!-- Begin Sitestat4 Loadingtime2 code -->
<script language='JavaScript1.1' type='text/javascript'>ns_loadingtime2=(new Date()).getTime()</script>
<!-- End Sitestat4 Loadingtime2 code -->
<noscript>
<img src="http://de.sitestat.com/retsch/de/s?site.uk.home.products.milling.rotormills." width="1" height="1">
</noscript>
<!-- End Sitestat4 code -->
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript  src='" + gaJsHost + "google-analytics.com/ga.js'  type='text/javascript'%3E%3C/script%3E"));
</script>

<script type="text/javascript">
var pageTrackerIntl = _gat._getTracker("UA-3064875-1");
pageTrackerIntl._initData();
pageTrackerIntl._trackPageview("/uk/products/milling/rotor-mills/");
</script>
<!-- No NLGA code. -->

</body>
</html>